chamfers

The simple design of the Malibu is classic Chevrolet, using chamfers, smoothed edges and sparse bits of what these days passes for chrome to create a staid but attractive package.

Role Reversal: 2008

Simple chamfers on workpieces are worked by means of the double plane and the adjustable iron fore plane.

7. Planing of Profiles Rolf Jakoby 1993

If chamfers cannot be made by means of planing, ripping tools are applied to produce short narrow faces (chamfers) on the edges of wooden workpieces.

6. Ripping of Faces, Edges and Corners Rolf Jakoby 1993

Smooth very gently - no chamfers must be produced!

Chapter 5 Rolf Becher 1993

This feature exerts a positive influence on handling the tool when turning chamfers and curves.

3. Tools Gnter Hanisch 1993

Such chamfers are mainly made with a ripping chisel at the edges of end-grained faces.

6. Ripping of Faces, Edges and Corners Rolf Jakoby 1993

Why are the workpieces provided with chamfers only after straight or spiral knurling?

5. Spiral knurling of small widths Horst Kth 1990

Additionally, the trainees practise filing of chamfers.

1. Objectives and contents of practical vocational training in the working technique of “Filing” 1990

Filing of flat and inclined surfaces, radii, a break-through and chamfers on square steel.

1. Objectives and contents of practical vocational training in the working technique of “Filing” 1990

For use on straight and curved external faces and on side edges to provide them with chamfers and to deburr edges.

2. Filing tools Frank Wenghfer 1990