2x12

The 2x12 is a little flatter in the midrange, but has an awesome low end Fender P-Bass, Eden 300w amp, same EQ settings for both cabs.

work, gearlust and talentenvy badger 2001

If need be, bolt it to a short 2x12 piece of lumber and set it across a folding sawhorse.

I have a Mec Jr 600 reloader but don't have a bench to mount it to. 2009

I use 2 pieces of 2x12 at the top and 2 pieces of 2x12 on the bottom and put a long threaded rod through the ends of each piece of lumber to hold the cardboard in a compressed state.

Im going to buy a target to shoot my bow in my backyard...Anyone have any good ideas for a backstop? 2009

I use 2 pieces of 2x12 at the top and 2 pieces of 2x12 on the bottom and put a long threaded rod through the ends of each piece of lumber to hold the cardboard in a compressed state.

Im going to buy a target to shoot my bow in my backyard...Anyone have any good ideas for a backstop? 2009

If I'm not mistaken the scope he was testing was the Bushnell Elite 6500 2x12 DOA that one of the recent blogs was on.

I caught Field and Stream Icons on TV and guess who was on? 2009

If need be, bolt it to a short 2x12 piece of lumber and set it across a folding sawhorse.

I have a Mec Jr 600 reloader but don't have a bench to mount it to. 2009

If I'm not mistaken the scope he was testing was the Bushnell Elite 6500 2x12 DOA that one of the recent blogs was on.

I caught Field and Stream Icons on TV and guess who was on? 2009

I don't have the strength to go into details, let's just say that it would be nice to do something around here with some modern power tools, i.e. using a hand rasp to try and turn a 2x12 into a 15-degree ramp along a long edge is NOT a lot of fun.

April 4th, 2007 archmage 2007

While we were there I followed up on a comment from Mike a couple of weeks ago, and asked Des there to help us test a set of high end bass cabinets from Bergantino, the 2x12 and 3x10.

work, gearlust and talentenvy badger 2001

You should have two of these about 16 feet long, and two 2x12 planks about 8 feet long.

Rough and Tumble Engineering James H. Maggard