Definitions
from The Century Dictionary.
- To separate, as what is joined by solder; disunite; dissolve; break up.
from the GNU version of the Collaborative International Dictionary of English.
- transitive verb To separate or disunite, as what has been soldered; hence, to divide; to sunder.
from Wiktionary, Creative Commons Attribution/Share-Alike License.
- verb To reverse the process of
soldering , such as by breaking the joint and removing the solder
from WordNet 3.0 Copyright 2006 by Princeton University. All rights reserved.
- verb remove the soldering from
Etymologies
from Wiktionary, Creative Commons Attribution/Share-Alike License
Support
Help support Wordnik (and make this page ad-free) by adopting the word unsolder.
Examples
-
Just cut between the two elbows and then unsolder the elbows from the pipes they are attached to.
Freshwater: Movement toward a settlement? - The Panda's Thumb 2010
-
The story line he is pitching with his struggles as a leader came as he formed the Avengers and dealing with the unsolder/vigilante like personalities of Stark, Hulk, Hawkeye, Thor etc.; who kind of viewed him as a cheesy golden boy do-gooder.
Joe Johnston's 'Big Plans' for Captain America & Jurassic Park 4 « FirstShowing.net 2010
-
It is a good idea to unsolder the metal clips from the circuit board that were used to hold the battery, and then solder the wires into the holes they were in.
-
The result is that the blade and block get hot enough near the teeth of the blade to unsolder or weaken the teeth on the blade.
Boing Boing 2006
-
But you must be careful not to unsolder the cylinder from its standard or the parts of the gland.
Things To Make Archibald Williams
-
If strained when very hot it is apt to unsolder the strainer.
Armour's Monthly Cook Book, Volume 2, No. 12, October 1913 A Monthly Magazine of Household Interest Various
-
Cut off a piece of steel rod of the proper length and unsolder the ends.
Things To Make Archibald Williams
-
Be careful not to unsolder the spindle bearing, a thing which cannot happen if the bearing is kept cool by an occasional drop or two of water.
Things To Make Archibald Williams
-
Different from the OBD-I Civic and Integra ecus, which you must add some extra parts, the OBD-0 Civic and CRX ecus do have a stock chip that can be replaced, making it simpler in a way, but tougher at the same time in another, because you will need to unsolder the stock chip, which is held with soldering in both top and bottom sides of the circuit board.
-
Different from the OBD-I Civic and Integra ecus, which you must add some extra parts, the OBD-I Accord and Prelude ecus do have a stock chip that can be replaced, making it simpler in a way, but tougher at the same time in another, because you will need to unsolder the stock chip, which is held with soldering in both top and bottom sides of the circuit board.
Comments
Log in or sign up to get involved in the conversation. It's quick and easy.